Stone Color Enhancer
Stone Color Enhancerâ„¢ brings out the magnificent colors of tumbled marble, slate tile, and flamed granite tile. It also seals the stones surface to add maximum protection.
Smooth Unpolished Surfaces:
- Be sure that the surface is free from loose debris and all coatings are completely removed.
- Apply with a Rayon mop or terry cloth towel only doing 50 square feet at a time. You can also spray a small area and spread with a terry cloth towel.
- Smooth the uneven and puddled areas with the mop or terry cloth towel.
- Let the surface completely dry for five to ten minutes and add a second coat if necessary.
- Proper curing time is approximately 24 hours.
Vanities, Walls and Countertops:
- Follow the above procedures but apply the COLOR ENHANCER with a clean, soft towel.
- Let the surface completely dry for five to ten minutes and add a second coat if necessary.
- Proper curing time is approximately 24 hours.
Rough Surfaces:
- Follow all of the above procedures but apply the COLOR ENHANCER with a pump sprayer.
Routine Maintenance:
- Dust/Dry mop smooth surfaces daily.
- Rough surfaces should be swept daily.
- All surfaces treated with Stone Color Enhancerâ„¢ should be cleaned daily with MARBALEX.
Disposal:
- Dispose of following local EPA regulations.
Recommendations:
- Always test on a small area before using to determine if the product is applicable.
- Test Area: Apply the Stone Color Enhancerâ„¢ to a small area at the project site in accordance to the manufacturers directions on the bottle label. Be sure to record all the test results including coverage and stain prevention.
- Test a small area before using to determine if the ENHANCER is appropriate.
- Do not allow the ENHANCER to puddle on the surface.
- Always smooth the ENHANCER on the surface.
- Not recommended for food handling surfaces.
Approximate Sq. Ft. Gallon (3.785 Liters) Coverage:
- Tumbled Marble 2,200 Sq Ft
- Flamed Granite 1,200 Sq Ft
- Honed Marble 2,800 Sq Ft
- Slate 1,600 Sq Ft
- Tumbled Marble
- Honed Marble
- Honed Granite
- Slate
- Flamed Granite
- Limestone
Textures/Surfaces:
- Tumbled
- Flamed/Thermal
- Rough Textured
- Honed
- Bush Hammered
- Sawn
*Do not use on glazed tile, polished surfaces, and non-porous surfaces. Not recommended for food handling surfaces
- Enhances the color of stone without altering the stone's natural crystalline structure.
- Will not build-up on the stone surface.
- Prevents dirt from adhering to stone surfaces.
- Simple to apply.
- Slip and scuff resistant.
- Protects the stone surface.
Technical Data:
- Colorless
- Non-yellowing
- Solvent-Based
- Permeable
- U.V. Transparent
- UL Classified for Slip Resistance